AMI MUCHPL205-15RFW Hanger Unit Bearings

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; Thickness, Height Indication:T Selection, h Confi; Bearing Part Number:6203; RoHS:6; Number of Bearings:Double; Bearing Retained:No; Type:Bearings with Housin;

T1 - Bearing Width:1.8755 in; Bearing Weight:9.3 lb; Cage Type:Stamped Steel; C - Cup Width:1.5000 in; C1 - Cup Flange Width:0.3120 in; Cg - Geometry Factor11:0.0945; B - Cone Width:1.9000 in; K - Factor7:1.71; D:6.3750 in; Series:755;

Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Flange Shape:Compact Type; Seals:DD (Contact Rubber S; Shape:Flange Type; Number of Bearings:Double; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Retained:No;

T min.:-20 °C; A1:28.4 mm; L:128.6 mm; C:25.7 kN; A:41 mm; H:39.7 mm; J:106 mm; T max.:100 °C; Designation of housing:PP207-; H1:4.4 mm;

Bearing Part Number:6801; Lateral Width L(mm):53; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing I.D. d(mm):12;

Locating Rings (width x OD):SR85X3.5; UPC Code:999999999; H2:25.0 mm; Material :Cast Iron; Shaft Diameter db:55 mm; C1 Dynamic Load Rating:109; G:M12; Shaft Diameter da:45 mm; H1:60.0 mm; Bearing:22209;

s1:34.1 mm; A3:1.5 mm; C0:11.2 kN; Weight:0.88 kg; C:19.5 kN; Designation of housing:C206-; SW:3.97 mm; A5:18.2 mm; B1:48.3 mm; d1:44.1 mm;

Cage Type:Stamped Steel; Cup Part Number:M252310X; C0 - Static Radial Rating:455000 lbf; R - Cone Backface To Clear Radius1:6.35 mm; Db - Cup Backface Backing Diameter:356.11 mm; D:381.000 mm; G1 - Heat Generation Factor (Roller-Raceway):1839.2; db - Cone Backface Backing Diameter:296.93 mm; Da - Cu

B:25.4 mm; Designation of closed end cover:SCCE207; J:130 mm; Designation of bearing:ES207G2T20; C0:15.2 kN; Recommended tightening torque for set screw:11.5 Nm; d:35 mm; Dz:80 mm; Designation of housing:FL207N-; T min.:-20 °C;

Designation of bearing:US209-26G2T04; T max.:100 °C; A1:33 mm; Recommended tightening torque for set screw:8 Nm; d:41.28 mm; H:53.9 mm; C0:20.8 kN; T min.:-40 °C; C:31.85 kN; G:M6x1;

H1:22 mm; Designation of open end cover:SCOU210-31; T max.:100 °C; H2:165 mm; s1:21.75 mm; Designation of bearing:US210-31G2; T min.:-20 °C; Weight:3.58 kg; H:110 mm; Recommended tightening torque for set screw:8 Nm;

Note:This product line wa; Bearing - Housing - Seal:LSE108BXHGHTPS; Series Type:Light Series; Dimension C:2.165 in; Cr - Dynamic Load Rating:14613 lbf; Dimension H:2.6 in; Dimension X (Thread):1 - 8 UNC; Bearing UPC:013992025418; Dimension G:3.9 in; Bearing Type:Split Cylindrical Ex;

Volume Discount:Available; Bearing Retained:No; Number of Bearings:Double; Width T(mm):50; Housing Material:[Aluminum Alloy] 201; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Retained:No; Flange O.D. H(φ):72; Type:Bearings with Housin;

C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; B - Cone Width:19.583 mm; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:39.88 mm; Cg - Geometry Factor:0.0668; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; r - Cup Backface To C

Rolling Element:Cylindrical Roller B; r1a max:1.5 mm; B:23 mm; Bore Profile:Straight; precision rating:ISO Class 0; Nlim (oil):6,300 rpm; F:78.5 mm; manufacturer product page:Click here; Outside Diameter:4.724 Inch | 120 Mil; Product Group:B04144;